| | | |

Multi-Power Port Family

Single-Power Port Family


PRODUCTS: SINGLE-POWER PORT BOXES

12,5 kW - Converter Module
Prod. Name: w12k400R

The w12k400R Module

This module has a single output of 12,5 kW and a frequency range of 10 to 400 kHz. The module is fed by the 3Φ mains and provides all the required features needed in an induction heating power supply. It provides a CAN Bus Communication output for the communication with a dedicated HMI. A low power induction heating power supply can be easily constructed as it needs only to be fed by the 3Φ mains, with the required protection circuits (breakers, fuses), the dedicated HMI and the output feds directly the heating station (output transformer, capacitor bank and heating inductor).

Typical applications

  • Induction Brazing
  • Induction Sealing
  • Induction Curing
  • Shrink Fitting
  • Coating
  • and so on ...

50 kW - Converter Power Module
Prod. Name: w50k400R

The w50k400R Module

This module has a single output of 50 kW and a frequency range of 10 to 400 kHz. The module is fed by the 3Φ mains and provides all the required features needed in an induction heating power supply. It provides a CAN Bus Communication output for the communication with a dedicated HMI. A medium power induction heating power supply can be easily constructed as needs only to be fed by the 3Φ mains, with the required protection circuits (breakers, fuses), the dedicated HMI and the output feds directly the heating station (output transformer, capacitor bank and heating inductor).

Typical applications

  • Induction Bonding
  • Multioutput Brazing
  • Induction Annealing
  • Stress Relieving
  • Induction Hardening
  • and so on ...

100 kW - Inverter Power Module
Prod. Name: w100k400

100 kW - Converter Power Module
Prod. Name: w100k400R

The w100k400 Module & the w100k400R Module

Both modules have a single output of 100 kW and a frequency range of 10 to 400 kHz allowing easy paralleling for power upgrading. The module w100k400 is fed with a DC voltage between 500 to 650 VDC while the module w100k400R is fed by the 3Φ mains. Both modules provide all the required features needed in an induction heating power supply. Both modules provide a CAN Bus Communication output for the communication with a dedicated HMI. In the case of the w100k400R module, an induction heating power supply can be easily constructed as it needs only to be fed by the 3Φ mains, with the required protection circuits (breakers, fuses), and the output feds directly the heating station (output transformer, capacitor bank and heating inductor).

Typical applications

  • Heat Treatment
  • Induction Hardening
  • Induction Tube Welding
  • and so on ...