| | | |

SiCMag Family

SiCWall Family

SiCMobi Family


PRODUCTS: UNIVERSAL INDUCTION HEATING POWER SUPPLY

The SiCMag family of power supplies corresponds to a range of generators for induction heating applications covering power levels from 12,5 to 800 kW and frequencies up to 400 kHz in two ranges 5 to 50 kHz and 20 to 400 kHz.

SiCMag generators are based on the ultimate power electronics technologies as Silicon Carbide (SiC) MOS Transistors, advanced DC link using antiferroelectric capacitors, ultrafast high isolation circuitry and advanced transistor driving circuits and fully digital controller all integrated in a PCB, allowing inverter efficiencies up to 99% @400 kHz and consequently very small and compact chillers.
Due to the wide frequency range of SiCMag generators many induction heating applications can be covered with the same generator. Also, the power output of SiCMag generators can be configured as single-power port or independent multi-power port output, allowing different applications with different power levels, different frequencies and also simultaneous frequency applications.
Power upgrading in SiCMag generators is a very simple operation, if the safety and input mains sections is prepared for, by just adding more power modules in the SiCMag cabinet.

100 kW - Generator
Prod. Name: HTG100k400

The HTG100k400 Generator

This module has a single output of 100 kW and a frequency range of 10 to 400 kHz. The module is fed by the 3Φ mains and provides all the required features needed in an induction heating power supply. It provides a Siemens HMI, and fieldbus as optional. This power induction heating power supply is fed by the 3Φ mains, and it includes protection circuits (breakers, fuses), the dedicated HMI and the output feds directly the heating station (output transformer, capacitor bank and heating inductor), which can be also provided by SiCtech Induction.

100 kW - Generator
Prod. Name: HTG100k400

The HTG100k400 Generator

This module has a single output of 100 kW and a frequency range of 10 to 400 kHz. The module is fed by the 3Φ mains and provides all the required features needed in an induction heating power supply. It provides a Siemens HMI, and fieldbus as optional. This power induction heating power supply is fed by the 3Φ mains, and it includes protection circuits (breakers, fuses), the dedicated HMI and the output feds directly the heating station (output transformer, capacitor bank and heating inductor), which can be also provided by SiCtech Induction.